FR-180 FR-200 FR-280 poultry dung dewatering machine/parrot droppings cow dung separator
Equipment Introduction
Screw press solid liquid separator is mainly consist of motor,reducer,screen,screw,pipe,pump, control cabinet.It is widely use in farm,especially for manure dewatering for cow,pig,horse,chicken,etc.
Spiral extrusion type solid-liquid separator is a new mechanical dewatering equipment developed by our company by referring to various advanced dewatering equipment at home and abroad and combining with our own dewatering equipment and manufacturing experience.Spiral extruding solid-liquid separator is mainly composed of control cabinet, pipeline, body, screen, extruding jiaolong, reduction motor, counterweight, unloading device and other parts, this equipment is widely used, and has been recognized by the majority of users in the market.
Working Principle
The principle of solid-liquid separator is spiral extrusion solid-liquid separation technology.The main components are: body, screen, extrusion and stranding, reduction motor, unloading device and other components.
After the cutting feed pump pumps the mixture to the solid-liquid separator through the pipeline, the separator starts, and the mixture is gradually pushed forward to the front of the body by squeezing the stringer.
At the same time, the pressure of the leading edge is constantlyincreased, forcing the water in the material to extrude the screen and flow out of the drain pipe.The work of the extruder is continuous, the material is continuously pumped into the body, the leading edge of the pressure is increasing, when to a certain extent, the discharge port will be opened, extrusion extrusion port, to achieve the purpose of extrusion.In order to grasp the speed and water content of the discharge, the control device in front of the main engine can be adjusted to achieve a satisfactory and appropriate discharge state.
Features
1.With 304stainless steel cover,which is easy to take off and observe.
2.Screw and screen adopt high quality 304SUS,Which is preservative,can use long time.
3.Easy operate,small dimension,low noise,work stable.
4.Low moisture content after press,you can't press out water by hand.After press the moisture content is around 60%,of course it is not water weight 60%.
5.Screw is full welding,which is more durable.
|
Model |
FR-180 |
FR-200 |
FR-280 |
|
Voltage |
380V |
380V |
380V |
|
power |
4kw |
4kw |
5.5kw |
|
Machine size(mm) |
2000*600*1300 |
2200*610*1350 |
2400*800*1300 |
|
Machine weight |
400kg |
510kg |
680kg |
|
Capacity |
8-10 M³/H |
10-15 M³/H |
20-25 M³/H |
|
Sieve diameter |
180mm |
200mm |
280mm |
|
Inlet diameter |
76mm |
76mm |
76mm |
|
Over flow port diameter |
76mm |
76mm |
76mm |
|
Drain pipe diameter |
110mm |
110mm |
110mm |
|
Material |
Carbon steel &304 stainless steel |
Ductile iron&304 stainless steel |
Ductile iron &304 stainless steel |
|
Screw and sieve material |
304 stainless steel |
304 stainless steel |
304 stainless steel |
Welcome to contact us!
Packaging & Shipping
1. Packing: PP film wrapped around the machine and carefully packed in wooden case to focus on protecting damageable parts.
2. Shipping: From port of Shenzhen, Shanghai, Qingdao, Guangzhou,etc. We also accept land, air, sea transport and international multimodal transport.
3. Clearance: Our long history makes us the one of the first and most knowledgeable providers of the equipment, our main customers hail from; Canada, the United States, Brazil, Argentina, Japan, Philippines, Australia, Russia, Thailand, the UAE, Poland, Spain, Germany, India, etc.
1.Ask:What is your guarantee of machine ?
Answer:usually our guarantee is 1 years.
2.Ask:About the machine voltage or power of machine ?
Answer:Usually in our country is 220v,50hz, single phase , or 380v, 50hz, 3 phase .if you have the special requirement ,pls tell us, we will vetify the voltage according to your requirement.
3.Ask:how to install the machine ?
Answer:we can intrust the install the machine by vedio, email ,picture.....if large project , we can arrange the worker help you to install it in your country .
4.Ask:How to order
Answer:
1. If you are interested in our products,please tell us which model,quantity you want to order
2. We will make a proforma invoice for your order
3. We will arrange the production and delivery when we received your payment
4. Payment terms:
A.T/T (Telegraphic Transfer):
30% as deposit,after seen the copy of the B/L sent by fax,the balance of 70% should be effected.
B.Western Union:
Fast and convenient, popular in the international trade!
C.Trade Assurance(Secure Payment):
---On-time shipment and pre-shipment product quality safeguards
---Refund up to the covered amount agree with your supplier
5.Extra service
1. Sample order is available
2. OEM whole container
3. Mixed container order available
){kind=link}